Invoke services

You can invoke services that have been deployed to Kalix in the following ways:

Exposing services to the internet

Kalix allows you to expose your services to the internet, using routes.

A route declares how traffic to a particular hostname gets routed to your services. You can let Kalix generate a hostname for you, or you can provide your own hostname at your own domain. If you want to use your own hostname, you’ll need to register your domain and configure your Domain Name System (DNS) settings using a third party DNS service.

All traffic to Kalix uses Transport Layer Security (TLS). Kalix will automatically provision a certificate for you using Let’s Encrypt. The certificate is provisioned whether you use a Kalix provided hostname, or bring your own.

Exposing a single service

If you have a single service you want to expose to the internet using a Kalix generated hostname, you can do so using the kalix service expose command. This command is provided as a convenience, particularly when you’re getting started with Kalix:

$ kalix service expose my-service
Service 'my-service' was successfully exposed at:

You can now access your service using the hostname described in the output of the command above. For example, if creating a gRPC client for the above service, you need to configure it to send requests to

You also have the option of enabling Cross-Origin Resource Sharing (CORS) for the service, using the --enable-cors flag.

Managing routes

Routes give you the ability to direct incoming traffic to a single hostname to more than one service. To manage this, you can use the kalix routes command. Before you create a route, you need to provision a hostname.

Provisioning a custom hostname

If you want to provision a custom hostname, you first need to register it with your project. Only one project can use a given hostname. Let’s say the hostname you want to register is called To register a hostname, use the kalix project hostname add command:

$ kalix project hostname add
HOSTNAME                      GENERATED   REGION     CNAME   false       us-east1
Notice the CNAME value above, this tells you what you need to point your hostname to. You will need to create a CNAME record for that points to with your DNS provider. Kalix will not provision any routes for this hostname until your DNS configuration is correct. Note, it can take up to 24 hours for DNS changes to take effect, depending on your DNS provider.

Provisioning a generated hostname

If you do not want to bring your own hostname, you can let Kalix generate one for you, by running kalix project hostname add with no arguments:

$ kalix project hostname add
HOSTNAME                                      GENERATED   REGION     CNAME   true        us-east1

This shows the hostname that was just generated for you. You will need this when you create your route.

Creating routes

Let’s assume you want to expose two gRPC services:

  1. shopping-cart, which has a gRPC service called acme.ecommerce.ShoppingCart

  2. product-info, which has a gRPC service called acme.ecommerce.ProductInfo

The path that a gRPC service is served at is the fully qualified name of the service. For example, the example.ecommerce.ShoppingCart will have a path of /example.ecommerce.ShoppingCart.

Let’s also assume that you want to name the route acme-ecommerce, and that the hostname you want to serve it at is, and that you’ve already added this route to the project following the instructions above.

We can now create the route:

kalix route create acme-ecommerce \
  --hostname \
  --path /example.ecommerce.ShoppingCart=shopping-cart \
  --path /example.ecommerce.ProductInfo=product-info

Having created it, we can now get its status by listing all routes:

$ kalix route list
NAME             HOSTNAME             PATHS                     CORS ENABLED   STATUS
acme-ecommerce   /example.ecommerce.Sho…   false          DnsNotVerified

Note above that the status is DnsNotVerified. This indicates that the DNS configuration for our custom hostname is not correct. More details can be obtained by getting details for the route:

$ kalix route get acme-ecommerce
Route: 	acme-ecommerce

         /example.ecommerce.ShoppingCart   shopping-cart
         /example.ecommerce.ProductInfo    product-info

	HostValidation: False
		Last Transition: 	Tue Nov  9 16:45:53 2021
		Reason: 	DnsNotVerified
		Message: 	Host did not resolve to a CNAME record. It must be configured to be a CNAME record to
	Ready: False
		Last Transition: 	Tue Nov  9 16:45:53 2021
		Reason: 	Validating
		Message: 	Validating hostname

Here you can see the exact error message - your hostname is not resolving. To rectify this, you would need to go to your DNS provider and update the DNS record for the host, and then wait for that change to propagate. Once the problem is fixed, there is nothing you need to do, Kalix will periodically recheck the DNS configuration to see if it’s updated, typically every 20 minutes. Note that DNS configuration can be cached in DNS servers for up to 24 hours, so it may take that long before Kalix can see your changes.

Updating routes

Routes can be updated using the kalix route update command. For example, to remove the product info service from the route, and also add an inventory service, you might run:

kalix route update acme-ecommerce \
  --remove-path /example.ecommerce.ProductInfo \
  --path /example.ecommerce.Inventory=inventory

Working with route descriptors

You may want to specify your routes using a descriptor. Descriptors can be checked into source control, allowing you to version your routing configuration. This can be useful if you have complex routes.

You can export an existing route using the kalix route export command, this will output the descriptor in YAML format:

$ kalix route export acme-ecommerce
  - GET
  - POST
- prefix: /example.ecommerce.ShoppingCart
    service: shopping-cart
- prefix: /example.ecommerce.ProductInfo
    service: product-info

To save the output of the command to a YAML file, you can run the command below:

kalix route export acme-ecommerce > acme-commerce-routes.yaml

To use this descriptor to either create or update a route, you can pass the file name using the -f flag:

kalix route update acme-ecommerce -f acme-ecommerce-route.yaml

You can also edit the route descriptor in place using the kalix route edit command. This will open the route descriptor in the editor configured in the EDITOR environment variable, allowing you to edit and save it. On exiting the editor, the route will be updated:

$ kalix route edit acme-ecommerce
Route updated.

Enabling CORS

CORS can be enabled by configuring at least one allowed origin, for example:

kalix route update acme-ecommerce --cors-origin

Securing routes

All routes are served with TLS certificates. In addition, you can also enable client certificate authentication, also known as Mutual TLS (mTLS). Instructions for doing this can be found in Client certificates.

Testing and development

During testing and development, you can use the kalix proxy command to invoke your services.

kalix proxy command

The kalix proxy command starts a proxy running locally on your machine that forwards all requests it receives to your service, via a mechanism that authenticates you as having access to manage the service, so that you can access it without exposing it to the internet. This can be used for ad-hoc invocations of your service for testing and debugging purposes, as well as by other services running locally on your machine for integration testing purposes.

In addition, it also offers a built in web based gRPC explorer that provides both form and JSON based mechanisms for creating messages, allows setting custom headers, and stores a history of prior invocations for reuse.

Only unary requests are supported by the kalix proxy. Server streamed requests may work if your service writes the entire stream and then immediately closes the response, however client streamed requests will not work. The exception to this is the gRPC reflection API, for which special handling has been implemented so that gRPC clients that use server reflection will work.
Do not use the kalix proxy command as a mechanism for tunneling requests from other systems. Invocations through the proxy are subject to quotas that, when exceeded, could temporarily block you from being able to manage your project. This feature is only intended for testing and development.

Starting the proxy

The proxy can be started by running the following:

kalix service proxy my-service

This will start the proxy on port 8080 bound to localhost. The proxy runs in the foreground, and will log the requests made through it as it receives them. You can stop the proxy by hitting Ctrl+C.

You can customize the port and bind address by running:

kalix service proxy my-service --port 8081 --bind-address

You can now invoke your services using an HTTP or gRPC client. TLS is not enabled, so it’s important to configure gRPC clients to use plaintext connections. So for example, using grpcurl to invoke your services from another terminal window:

grpcurl -plaintext -d '{"cartId":"my-cart"}' localhost:8080 \

If you are using Kalix’s HTTP to gRPC transcoding support, you can also invoke them as a REST API, for example using curl:

curl http://localhost:8080/carts/my-cart

Using the built in graphical client

The kalix command can also start a graphical client, which embeds grpcui in the proxy, allowing you to easily explore your services and build and make requests on them. To enable it, use the --grpcui flag:

kalix service proxy my-service --grpcui

A web browser will automatically be opened for you on the gRPC UI explorer page served by the proxy:

The gRPC UI explorer